Končno Tomato z USB, NAS, FTP, SMB in to z GUI

Splošni pogovori, ki niso povezani s T-2
Odgovori
Uporabniški avatar
Seeker
Navdušenec
Prispevkov: 646
Pridružen: 29. Avg 2006 ob 21:41
T-2: Še nimam

Končno Tomato z USB, NAS, FTP, SMB in to z GUI

Odgovor Napisal/-a Seeker » 10. Maj 2009 ob 20:04

Kar veliko kratic, a? :D

V glavnem, če imate router in na njem Tomato, ki do sedaj ni znal z USB portom početi nič, se zdaj da USB porabiti za mrežni disk ali printer, za dosego tega pa vam ni treba Linux konzole ali DD-WRTja niti pogledati. Ta firmware NE podpira USB kamerc ali USB modemov. Sicer je stvar vzun že nekaj mesecev, ampak jaz sem danes prvič naletel nanjo in je treba povedat okol...

Hitrosti so okol 15 mbitov (2 MB/s).

Slika

Slika

Spremembe od "uradnega" Tomato 1.23:
* Support for USB 1.1 (OHCI and UHCI) and USB 2.0, configurable via Tomato GUI.
* USB storage (Ext2/Ext3 and FAT/FAT32 filesystems) and USB printing support.
* Auto-mounting for USB drives (added in v05). When this feature is activated in the GUI, and USB drive is plugged in, all mountable partitions will be automatically mounted to a directory under /mnt. If you want to override default mount point, mount your partition manually in the satrtup, wanup, or hotplug script, i.e.:
mount -o noatime,nodev /dev/discs/disc0/part1 /opt,
or by using /etc/fstab file and "mount -a" command.
If you mount the partition manually, it will not be re-mounted to a default mount point. If after mounting the drive you want to execute some additional scripts - to run the programs etc - it's a good idea to add several seconds sleep before doing so.
* Support for /ets/fstab, and mounting by label and UUID.
* Network File Sharing using built-in Samba server 2.0.10. Please check this post if you're experiencing problems copying files to Samba shares, and this post if you have issues with authenticated access to Samba shares.
* Printer server (p910nd 0.93) is included and started automatically if you enable printing support. Bidirectional copying can be disabled via GUI if it causes problems with your printer. Only one instance of printer server is started automatically, and listens on port 9100. If you need to support more than 1 printer, add commands to run additional instances of p910nd to your startup script. Follow these directions to set up your printer in Windows.
* USB Hotplug script - it can be useful for configuring USB devices after connecting them to the router or on boot-up, for example loading firmware into HP1018 or similar printer (there're some posts on page 11 of this thread with more details about HP1018 printer).
* Fixed slow running clock problem on Asus WL-520GU. After flashing this firmware you have to reboot the router at least once for clock to get fixed.
* Fixed WLAN LED on Asus WL-520GU, SES button and WLAN led on Asus WL500gP v1 and Buffalo WBR2-G54.
* Built-in FTP server daemon (vsftpd 2.1.0) with GUI.
* RTP l7 filter is updated to the latest official version (12/18/2008), removed experimental rtp-2 pattern.
* Added CGI scripts support to HTTP daemon - you can place your CGI scripts into "/www/ext/cgi-bin" folder, and they will be executed when you access them via http://<router_ip>/ext/cgi-bin/my_script_name.
* Included SpeedMod by Rodney H.
* Added new "NAT Target" setting to "Advanced -> Firewall" (SNAT or MASQUERADE).
* Upgraded Broadcom Wireless driver to version 4.158.4.0.
* UPnP daemon is replaced with MiniUPnPd with NAT-PMP support. UPnP is disabled by default.
* Added new "Regulatory Mode" setting (off|g|h) and "Country/Region" setting to "Advanced -> Wireless".
* Added wireless auto channel selection.
* Changed to use passive mode for wireless scan (generally should pick up more APs).
* Replaced JFFS2 filesystem driver by JFFS ver 1.3 from ray123 to provide more available JFFS space.
Link, na katerem izveste vse, kar potrebujete: http://www.linksysinfo.org/forums/showt ... hp?t=60185
Zadnjič spremenil Seeker, dne 10. Maj 2009 ob 21:18, skupaj popravljeno 1 krat.

Uporabniški avatar
KoMar
Administrator
Prispevkov: 3979
Pridružen: 17. Mar 2006 ob 11:43
T-2: Že imam
Paket: 100/10 FTTH

Re: Končno Tomato z USB, NAS, FTP, SMB in to z GUI

Odgovor Napisal/-a KoMar » 10. Maj 2009 ob 20:12

Sexy :)

NoBody
T-2jevec / Moderator
Prispevkov: 351
Pridružen: 28. Nov 2006 ob 16:49
T-2: Že imam
Paket: T4 100/10
Kraj: Maribor

Re: Končno Tomato z USB, NAS, FTP, SMB in to z GUI

Odgovor Napisal/-a NoBody » 12. Maj 2009 ob 09:51

Ker mislim v kratkem kupit Linksys WRT54GL me zanima če ima ta usb priključek? Če nima, kateri model ima.

lp
Slika

Uporabniški avatar
buneech
Navdušenec
Prispevkov: 695
Pridružen: 25. Nov 2007 ob 15:58
T-2: Že imam
Paket: 10/10

Re: Končno Tomato z USB, NAS, FTP, SMB in to z GUI

Odgovor Napisal/-a buneech » 12. Maj 2009 ob 10:09

Nima USB priključka, ASUS WL500G ima USB priključek.
Trolling is a art.

NoBody
T-2jevec / Moderator
Prispevkov: 351
Pridružen: 28. Nov 2006 ob 16:49
T-2: Že imam
Paket: T4 100/10
Kraj: Maribor

Re: Končno Tomato z USB, NAS, FTP, SMB in to z GUI

Odgovor Napisal/-a NoBody » 12. Maj 2009 ob 10:16

Kaj pa keri od Linksys ?

lp
Slika

Uporabniški avatar
buneech
Navdušenec
Prispevkov: 695
Pridružen: 25. Nov 2007 ob 15:58
T-2: Že imam
Paket: 10/10

Re: Končno Tomato z USB, NAS, FTP, SMB in to z GUI

Odgovor Napisal/-a buneech » 12. Maj 2009 ob 10:39

WRTSL54GS - samo ne vem kako je s tomatom na temu routerju.
Trolling is a art.

Uporabniški avatar
Seeker
Navdušenec
Prispevkov: 646
Pridružen: 29. Avg 2006 ob 21:41
T-2: Še nimam

Re: Končno Tomato z USB, NAS, FTP, SMB in to z GUI

Odgovor Napisal/-a Seeker » 21. Maj 2009 ob 23:11

Danes sem se še malo poigral z različnimi filesystemi na tem NASu. Najbolje se je odrezal ext2. Read in write grafa sem zlepil skupaj, zato nista grafično primerljiva med sabo. So pa zraven dopisane še številčne vrednosti. Do ext2 dostopa le router, iz Windows mašin se disk vidi normalno, ker se filesystem ob prenosu preko mreže itak pretvori v SMB/CIFS, kar berejo Windowsi, Linux in Maci.

Slika

btw: To je pa očitno kar hitrejše, boljše in predvsem cenejše, kot kakšni WD My Book World Edition...

gulikoza
Starešina
Prispevkov: 1646
Pridružen: 17. Mar 2006 ob 15:33
T-2: Že imam
Paket: 50/50 FTTH

Re: Končno Tomato z USB, NAS, FTP, SMB in to z GUI

Odgovor Napisal/-a gulikoza » 23. Maj 2009 ob 15:08

Če diska nikoli ne ugasneš brez da bi ga unmountal in imaš ext2, potem načeloma ne bo problemov....drugače pa se zna lepega dne zgodit, da na disku ne bo nič več :mrgreen:
Slika Optika od 30.5.2008

Uporabniški avatar
borutz
Navdušenec
Prispevkov: 666
Pridružen: 13. Feb 2007 ob 13:31
T-2: Že imam
Kraj: Spodnja Idrija

Re: Končno Tomato z USB, NAS, FTP, SMB in to z GUI

Odgovor Napisal/-a borutz » 23. Maj 2009 ob 18:45

kaj pa ext3? Govorim za primer NMTjev
Slika

Uporabniški avatar
Seeker
Navdušenec
Prispevkov: 646
Pridružen: 29. Avg 2006 ob 21:41
T-2: Še nimam

Re: Končno Tomato z USB, NAS, FTP, SMB in to z GUI

Odgovor Napisal/-a Seeker » 23. Maj 2009 ob 21:02

ext3 je journaling FS, tako da je varen.

pa tudi gulikoza je kar orenk pretiraval s tistim da izgubiš VSE podatke. v najslabšem primeru moraš še enkrat dati kopirati, če ti lih na sred filma zmanjka štroma.

ext2 je nekako primerljiv s fat32, razen da je brez "4gb na datoteko" omejitve. če že moraš biti 100%, daj ext3. vsekakor je oboje boljše kot fat32, to sem hotel pokazati.

Uporabniški avatar
borutz
Navdušenec
Prispevkov: 666
Pridružen: 13. Feb 2007 ob 13:31
T-2: Že imam
Kraj: Spodnja Idrija

Re: Končno Tomato z USB, NAS, FTP, SMB in to z GUI

Odgovor Napisal/-a borutz » 24. Maj 2009 ob 20:24

še eno vprašanje. V mojem Egreatu imam notri 640gb 3.5 disk. Poln je nekje 350gb. Danes sem nabavil 2.5 500gb disk, da bo tišji in mi ne bo treba priklapljati ventilatorja. Je kakšna varijanta da to skloniram na tak način da potem samo menjam diske? Res se mi ne da na roke kopirat.
Slika

Odgovori