Neuradni T-2 forum

Neuradni forum uporabnikov T-2
https://t-2.rula.net/

IPTV na računalniku

https://t-2.rula.net/viewtopic.php?t=2166

Stran 97 od 291

Re: IPTV na računalniku

Objavljeno: 10. Jan 2009 ob 22:48
Napisal/-a vijavaja
Nimaš povezave. Kje pa je napaka, pa težko rečem. Switch, mrežna, kabel? Samo ugibam, vsekakor pa malo poskušaj in poskusi izločiti napako.

Re: IPTV na računalniku

Objavljeno: 10. Jan 2009 ob 23:57
Napisal/-a dule17
če maš vdsl2 načeloma ne rabš force IPv4, razen če maš dve mrežne. Glede na izpis bi reku da nimaš povezave preko IPja ki ga maš napisanga. Maš ročno nastavlen IP na mrežni za TV, gledaš tv preko iste kot imaš internet,...?

Če maš vdsl 2 zbriš force IPv4, pa ne nastavli ročno ipja mrežne, pa bi mogl delat, če gre mim routerja al pa maš multicast nastavlen. Pol bi mogl delat.

Če maš vdsl1 pa dve mrežne pa ročno nastav mrežno za TV, pust force IPv4 pa še povej vlcju ip od mrežne k fura tv.

kockanje in zeleni "izdelki" kažejo na slab pretok, lahko je zanič mrežna, slab kabel al pa težava na kakšnem switchu. Enkrat sm mel te težave in sem zamenju kable, switche, itd, na konc pa ugotovu da je mrežna fuč. Drugič je blo pa obratn, je bil pa kabel zanč. V obeh primerih je povezava delala, sam je bla u k....

Re: IPTV na računalniku

Objavljeno: 11. Jan 2009 ob 09:15
Napisal/-a daver
force IPv4 sem odkljukal in glej ga... :car: Dela! :rtmT2:
Hvala vam fantje za pomoč... Takšna malenkost, da se zdaj prav bedasto počutim... :oops:
Lepo se imejte! :pivo:

Re: IPTV na računalniku

Objavljeno: 11. Jan 2009 ob 21:13
Napisal/-a Himelor12
imam FTTH internet in telefonijo odločam se še za naročilo televizije
polege navadne tv bi rad imel tv tudi na računalniku
zanima me koliko vmesnikov moram naročiti, kako poteka "kablovje" kje mora biti vmesnik?
ali je možno istočasno na rač. uporabljati internet in gledati tv, če ne kaj treba vsakič spremeniti?
prav tako me zanima zakaj je na Milanu 8 portov uporabljaš pa lahko samo 3 ker ti drugače baje neki zablokerajo
zakaj more bit 10 škatel ko bi pa lahko bila samo ena?


hvala za odgovor

Re: IPTV na računalniku

Objavljeno: 11. Jan 2009 ob 21:29
Napisal/-a Constantine
Vprašanje.

Pro7 in Sat 1 mi zatika na VLC, ne veliko ampak vendrale je moteče. To počne še komu?

In še pod vprašanje. Sem mnenja da bi moj PC moral HD vsebine prebavljati normalno ( Intel Core2Duo 6400 2.13GHz, 8GB RAM, ATI 4870 ), ampak mi zatika. Ali se mogoče motim in procesor ni dovolj?

Re: IPTV na računalniku

Objavljeno: 11. Jan 2009 ob 22:58
Napisal/-a grizli-t2netko
Himelor12 - naročiš 2 televiziji, pravo tv gledaš prek aminota, na računalniku pa preprosto potegneš utp kabel (iz tistega izhoda kjer bi drugače priklopil 2gega aminota) v mrežno na pcju in nastaviš ip v programu za ogled tv (pri fliptv in visti/win 7 tudi tega ni treba), internet pa potegneš prek drugega utp kabla v drugo mrežno.
Tako gledaš tv in surfaš po netu naenkrat brez problema (tv ne obremenjuje interneta ker gre po svojem kanalu - s tem mislim na samo internetno povezavo).

Re: IPTV na računalniku

Objavljeno: 12. Jan 2009 ob 09:05
Napisal/-a kokica2000
Ni potrebno naročiti dveh televizij!

Re: IPTV na računalniku

Objavljeno: 12. Jan 2009 ob 11:14
Napisal/-a vijavaja
@himelor12 :beri: tukaj http://t-2.rula.net/viewtopic.php?f=3&t=3217

Re: IPTV na računalniku

Objavljeno: 12. Jan 2009 ob 11:19
Napisal/-a slow_slow
Odvisno kaj ima vse naročeno in če je ne VDSL, v kolikor je na VDSL je čist možno da mu ne bo delalo če bo imel samo 1x tv naročeno

Re: IPTV na računalniku

Objavljeno: 12. Jan 2009 ob 12:52
Napisal/-a nemo
Himelor12 napisal/-a:imam FTTH
... je napisal, tako da ena naročnina povsem zadostuje.

Re: IPTV na računalniku

Objavljeno: 12. Jan 2009 ob 19:49
Napisal/-a vremenar
zakaj mi zablokira wireless internet na notebooku, če gledam ip-tv na drugem računalniku preko žice?? (dd-wrt)

Re: IPTV na računalniku

Objavljeno: 12. Jan 2009 ob 21:39
Napisal/-a Seeker
vremenar, namig: viewtopic.php?f=3&t=4150&start=15

Re: IPTV na računalniku

Objavljeno: 13. Jan 2009 ob 10:07
Napisal/-a roberthx
gr, meni ta zadnja lista programov ne dela. Dela pa malo starejša...

Re: IPTV na računalniku

Objavljeno: 13. Jan 2009 ob 17:37
Napisal/-a vremenar
Seeker napisal/-a:vremenar, namig: viewtopic.php?f=3&t=4150&start=15
ja, poučna zadeva, sem jo jst tut že prebiral prej, vendar ne vem kje je ta možnost v dd-wrt FW. ker ko sem imel tomato sem jo videl, vendar se mi tomato ni dopadel, tko da sem nazaj na dd-wrt in na njem rešujem probleme 8)

Re: IPTV na računalniku

Objavljeno: 13. Jan 2009 ob 18:43
Napisal/-a SoLoR
A ma kdo kako idejo, zakaj mi VLC po verziji 0.8.6x, noče "začenjati" multicast stremov? Če odprem določen program v friptv, mi nato v VLC dela normalno, ne glede a imam friptv še odprt ali ne, če pa programa ne odprem prej v friptv pa mi ga sploh noče odpret... nikakor :(

to je start/stop POPTVja brez da bi prej odpru program v friptv

Koda: Izberi vse

main debug: starting new item
main debug: processing request item POP TV node Playlist skip 0
main debug: resyncing on POP TV
main debug: POP TV is at 0
main debug: creating new input thread
main debug: Creating an input for 'POP TV'
main debug: waiting for thread initialization
main debug: thread started
main debug: thread 6216 (input) created at priority 1 (input/input.c:370)
qt4 debug: Updating the stream status: 3
main debug: `udp://@239.1.1.9:5000' gives access `udp' demux `' path `@239.1.1.9:5000'
main debug: creating demux: access='udp' demux='' path='@239.1.1.9:5000'
main debug: looking for access_demux module: 0 candidates
main warning: no access_demux module matched "udp"
main debug: TIMER module_Need() : 0.000 ms - Total 0.000 ms / 1 intvls (Avg 0.000 ms)
main debug: creating access 'udp' path='@239.1.1.9:5000'
main debug: looking for access module: 1 candidate
access_udp debug: opening server=:0 local=239.1.1.9:5000
main debug: net: opening 239.1.1.9 datagram port 5000
main debug: Multicast group join request
main debug: using access module "access_udp"
main debug: TIMER module_Need() : 5.000 ms - Total 5.000 ms / 1 intvls (Avg 5.000 ms)
qt4 debug: New Event: type 1103
qt4 debug: Updating the stream status: 2
main debug: Using AStream*Block
main debug: pre buffering
main debug: incoming request - stopping current input
main debug: waitpipe: object killed
main debug: dying input
main debug: socket 5384 polling interrupted
main debug: prebuffering done 0 bytes in 8s - 0 kbytes/s
main error: cannot pre fill buffer
main warning: cannot create a stream_t from access
main debug: removing module "access_udp"
qt4 debug: Updating the stream status: 8
main debug: thread ended
main debug: dead input
main debug: thread times: real 0m8.940012s, kernel 0m0.015600s, user 0m0.000000s
main debug: thread 6216 joined (playlist/engine.c:244)
main debug: TIMER input launching for 'POP TV' : 8950.000 ms - Total 8950.000 ms / 1 intvls (Avg 8950.000 ms)
tole je pa start/stop z friptvjem:

Koda: Izberi vse

main debug: starting new item
main debug: processing request item POP TV node Playlist skip 0
main debug: resyncing on POP TV
main debug: POP TV is at 0
main debug: creating new input thread
main debug: Creating an input for 'POP TV'
main debug: waiting for thread initialization
main debug: thread started
main debug: thread 5732 (input) created at priority 1 (input/input.c:370)
main debug: `udp://@239.1.1.9:5000' gives access `udp' demux `' path `@239.1.1.9:5000'
qt4 debug: Updating the stream status: 3
main debug: creating demux: access='udp' demux='' path='@239.1.1.9:5000'
main debug: looking for access_demux module: 0 candidates
main warning: no access_demux module matched "udp"
main debug: TIMER module_Need() : 0.000 ms - Total 0.000 ms / 1 intvls (Avg 0.000 ms)
main debug: creating access 'udp' path='@239.1.1.9:5000'
main debug: looking for access module: 1 candidate
access_udp debug: opening server=:0 local=239.1.1.9:5000
main debug: net: opening 239.1.1.9 datagram port 5000
main debug: Multicast group join request
main debug: using access module "access_udp"
main debug: TIMER module_Need() : 0.000 ms - Total 0.000 ms / 1 intvls (Avg 0.000 ms)
main debug: Using AStream*Block
main debug: pre buffering
qt4 debug: New Event: type 1103
qt4 debug: Updating the stream status: 2
main debug: creating demux: access='udp' demux='' path='@239.1.1.9:5000'
main debug: looking for demux module: 51 candidates
main debug: using demux module "ts"
main debug: TIMER module_Need() : 5.000 ms - Total 5.000 ms / 1 intvls (Avg 5.000 ms)
main debug: looking for a subtitle file in D:\Downloads\vlc-0.9.8a\
ts debug: DEMUX_SET_GROUP 0 00000000
access_udp warning: unimplemented query in control
main debug: `udp://@239.1.1.9:5000' successfully opened
ts debug: pid[300] unknown
ts debug: pid[400] unknown
qt4 debug: New Event: type 1103
qt4 debug: Updating the stream status: 3
ts debug: pid[301] unknown
main debug: control type=1
ts debug: PATCallBack called
ts debug: new PAT ts_id=1 version=5 current_next=1
ts debug:   * number=1 pid=60
ts debug: PMTCallBack called
ts debug: new PMT program number=1 version=5 pid_pcr=300
ts debug:   * es pid=300 type=2 fcc=mpgv
main debug: selecting program id=1
qt4 debug: New Event: type 1108
main debug: looking for decoder module: 34 candidates
main debug: using decoder module "libmpeg2"
main debug: TIMER module_Need() : 0.000 ms - Total 0.000 ms / 1 intvls (Avg 0.000 ms)
main debug: thread 6256 (decoder) created at priority 0 (input/decoder.c:217)
main debug: thread started
ts debug:   * es pid=301 type=3 fcc=mpga
main debug: looking for decoder module: 34 candidates
main debug: using decoder module "mpeg_audio"
main debug: TIMER module_Need() : 25.000 ms - Total 25.000 ms / 1 intvls (Avg 25.000 ms)
main debug: thread 6196 (decoder) created at priority 2 (input/decoder.c:217)
ts debug:   * es pid=400 type=6 dr->i_tag=0x56
ts debug:     * EBU Teletext descriptor
ts debug:     * ttxt lan=eng page=100
main debug: thread started
ts debug:   * es pid=400 type=6 fcc=telx
qt4 debug: New Event: type 1108
ts warning: first packet for pid=300 cc=0x8
ts warning: first packet for pid=400 cc=0xe
mpeg_audio debug: MPGA channels:2 samplerate:48000 bitrate:256
main debug: no aout present, spawning one
main debug: looking for audio output module: 3 candidates
aout_directx debug: OpenAudio
aout_directx debug: found device: Primary Sound Driver
aout_directx debug: found device: Speakers (Creative SB X-Fi)
aout_directx debug: found device: SPDIF Out (Creative SB X-Fi)
aout_directx debug: device supports 2 channels (DEFAULT!)
aout_directx debug: device supports 2 channels
aout_directx debug: device supports 1 channel
aout_directx debug: Windows says your SpeakerConfig is stereo
aout_directx debug: creating DirectSoundThread
main debug: thread 8764 (DirectSound Notification Thread) created at priority 15 (directx.c:392)
main debug: using audio output module "aout_directx"
main debug: TIMER module_Need() : 10.000 ms - Total 10.000 ms / 1 intvls (Avg 10.000 ms)
main debug: output 's16l' 48000 Hz Stereo frame=1 samples/4 bytes
main debug: mixer 'fl32' 48000 Hz Stereo frame=1 samples/8 bytes
main debug: filter(s) 'fl32'->'s16l' 48000 Hz->48000 Hz Stereo->Stereo
main debug: thread started
aout_directx debug: DirectSoundThread ready
main debug: looking for audio filter module: 24 candidates
main debug: using audio filter module "converter_float"
main debug: TIMER module_Need() : 5.000 ms - Total 5.000 ms / 1 intvls (Avg 5.000 ms)
main debug: found a filter for the whole conversion
main debug: looking for audio mixer module: 3 candidates
main debug: using audio mixer module "float32_mixer"
main debug: TIMER module_Need() : 0.000 ms - Total 0.000 ms / 1 intvls (Avg 0.000 ms)
main debug: input 'mpga' 48000 Hz Stereo frame=1152 samples/1161 bytes
main debug: filter(s) 'mpga'->'fl32' 48000 Hz->48000 Hz Stereo->Stereo
main debug: looking for audio filter module: 24 candidates
main debug: using audio filter module "mpgatofixed32"
main debug: TIMER module_Need() : 0.000 ms - Total 0.000 ms / 1 intvls (Avg 0.000 ms)
main debug: found a filter for the whole conversion
main debug: filter(s) 'fl32'->'fl32' 52800 Hz->48000 Hz Stereo->Stereo
main debug: looking for audio filter module: 24 candidates
main debug: using audio filter module "bandlimited_resampler"
main debug: TIMER module_Need() : 0.000 ms - Total 0.000 ms / 1 intvls (Avg 0.000 ms)
main debug: found a filter for the whole conversion
libmpeg2 debug: 720x576 (display 720,576), aspect 576000, sar 16:15, 25.000 fps
main debug: no usable vout present, spawning one
main debug: window size: 768x576
main debug: looking for video output module: 9 candidates
wingdi debug: creating Vout EventThread
main debug: waiting for thread initialization
main debug: thread started
wingdi debug: DirectXCreateWindow
main debug: looking for vout window module: 2 candidates
qt4 debug: waiting for interface...
qt4 debug: requesting window...
qt4 debug: Video was requested -1, -1
qt4 debug: Video is resizing to: 768 576
qt4 debug: Qt FS: Attaching Vout
qt4 debug: Qt: Changing Fullscreen Mode
qt4 debug: Updating the geometry
main debug: using vout window module "qt4"
main debug: TIMER module_Need() : 0.000 ms - Total 0.000 ms / 1 intvls (Avg 0.000 ms)
wingdi debug: created video sub-window
main debug: thread 8800 (VLC Vout Events Thread) created at priority 0 (wingdi.c:254)
wingdi debug: Vout EventThread running
wingdi debug: disabling screen saver
main debug: using video output module "wingdi"
main debug: TIMER module_Need() : 5.000 ms - Total 5.000 ms / 1 intvls (Avg 5.000 ms)
main debug: waiting for thread initialization
main debug: thread started
wingdi debug: GDI depth is 32
main debug: got 1 direct buffer(s)
main debug: picture in 720x576 (0,0,720x576), chroma I420, ar 4:3, sar 16:15
main debug: picture user 720x576 (0,0,720x576), chroma I420, ar 4:3, sar 16:15
main debug: picture out 720x576 (0,0,720x576), chroma RV32, ar 4:3, sar 16:15
main debug: looking for video filter2 module: 19 candidates
swscale debug: 720x576 chroma: I420 -> 720x576 chroma: RV32 with scaling using Bicubic (good quality)
main debug: using video filter2 module "swscale"
main debug: TIMER module_Need() : 0.000 ms - Total 0.000 ms / 1 intvls (Avg 0.000 ms)
main debug: indirect render, mapping render pictures 0-7 to system pictures 1-8
main debug: thread 8916 (video output) created at priority 1 (video_output/video_output.c:502)
main warning: dts != current_pts (-199220)
qt4 debug: New Event: type 1109
main warning: decoder synchro warning: pts != current_date (-40000)
main debug: looking for text renderer module: 2 candidates
main debug: thread 9028 (fontlist builder) created at priority 0 (freetype.c:477)
freetype debug: using fontsize: 36
main debug: using text renderer module "freetype"
main debug: TIMER module_Need() : 2.000 ms - Total 2.000 ms / 1 intvls (Avg 2.000 ms)
freetype debug: using fontsize: 36
main debug: thread started
freetype debug: Building font database...
freetype debug: Finished building font database.
freetype debug: Took 0 seconds
main debug: thread ended
main debug: looking for video blending module: 1 candidate
blend debug: chroma: YUVA -> RV32
main debug: using video blending module "blend"
main debug: TIMER module_Need() : 0.000 ms - Total 0.000 ms / 1 intvls (Avg 0.000 ms)
main debug: decoded 106/108 pictures
main debug: incoming request - stopping current input
main debug: waitpipe: object killed
main debug: socket 6440 polling interrupted
main debug: dying input
main debug: removing module "libmpeg2"
main debug: thread ended
ts debug: eof ?
main debug: EOF reached
main debug: control type=0
main debug: control: stopping input
ts debug: pid list:
ts debug:   - pid[0] seen
ts debug:   - pid[60] seen
main debug: thread times: real 0m16.035246s, kernel 0m0.000000s, user 0m0.000000s
main debug: thread 6256 joined (input/decoder.c:248)
qt4 debug: Updating the stream status: 8
main debug: killing decoder fourcc `mpgv', 7 PES in FIFO
main debug: dying input
main debug: removing module "swscale"
main debug: thread ended
main debug: thread times: real 0m15.795247s, kernel 0m0.000000s, user 0m0.000000s
main debug: thread 8916 joined (video_output/video_output.c:536)
wingdi debug: DirectXEventThread terminating
wingdi debug: DirectXCloseWindow
wingdi debug: WinProc WM_DESTROY
qt4 debug: Qt FS: Detaching Vout
qt4 debug: Qt: Changing Fullscreen Mode
main debug: removing module "qt4"
qt4 debug: Video is not needed anymore
main debug: thread ended
qt4 debug: Updating the geometry
main debug: thread times: real 0m15.802747s, kernel 0m0.000000s, user 0m0.000000s
main debug: thread 8800 joined (wingdi.c:338)
main debug: removing module "wingdi"
main debug: removing module "blend"
main debug: thread times: real 0m0.000000s, kernel 0m0.000000s, user 0m0.000000s
main debug: thread 9028 joined (freetype.c:511)
main debug: removing module "freetype"
ts debug:   - pid[300] seen
main debug: removing module "mpeg_audio"
main debug: thread ended
main debug: thread times: real 0m16.062747s, kernel 0m0.015600s, user 0m0.078000s
main debug: thread 6196 joined (input/decoder.c:248)
main debug: killing decoder fourcc `mpga', 0 PES in FIFO
main debug: removing module "mpgatofixed32"
main debug: removing module "bandlimited_resampler"
aout_directx debug: closing audio device
main debug: dying input
aout_directx debug: DirectSoundThread exiting
main debug: thread ended
main debug: thread times: real 0m15.977748s, kernel 0m0.000000s, user 0m0.000000s
main debug: thread 8764 joined (directx.c:664)
main debug: removing module "aout_directx"
main debug: removing module "converter_float"
main debug: removing module "float32_mixer"
ts debug:   - pid[301] seen
main debug: Program doesn't contain anymore ES
ts debug:   - pid[400] seen
ts debug:   - pid[8191] seen
main debug: removing module "ts"
main debug: removing module "access_udp"
main debug: thread ended
main debug: dead input
main debug: thread times: real 0m16.227748s, kernel 0m0.187201s, user 0m0.093600s
main debug: thread 5732 joined (playlist/engine.c:244)
main debug: TIMER input launching for 'POP TV' : 20.000 ms - Total 20.000 ms / 1 intvls (Avg 20.000 ms)
komu kaj jasno, mi to ne dela pac vse od verzije 0.8.6 pa vsake tolk cajta poskušam usposobit :)
Vsi časi so UTC+02:00
Stran 97 od 291
Powered by phpBB® Forum Software © phpBB Limited
https://www.phpbb.com/